有时候客户会偶尔反应手板模型使用寿命不长，如果保养不得当会影响其使用周期的。不同材质的手板模型保养时候要注意的地方也会不同。如环境、温度等的影响很大。针对这个问题，济南手板生产厂家为大家讲解一下其保养注意事项。

Sometimes the customer will occasionally report that the service life of the prototype is not long. If the maintenance is not allowed, the service life will be affected. There are different points to pay attention to in the maintenance of hand models made of different materials. Such as environment, temperature, etc. In response to this problem, the Jinan prototype manufacturer explained the maintenance precautions for everyone.

硅胶材质的手板模型比较容易吸尘，所以存放的时候，好放到阴凉干净的柜子或者盒子里；不能用重压或是大力拉扯，不能用锋利的器具接触，也不能直接与火源或电接触，这样很容易造成损毁；可常用温热水清洗，不能用具有腐蚀性的物质清洗。

The silica gel model is easy to vacuum, so it is better to store it in a cool and clean cabinet or box; Do not use heavy pressure or strong pull, do not use sharp tools to contact, and do not directly contact with fire or electricity, which may easily cause damage; It can be cleaned with warm water, not with corrosive substances.

金属材质的手板模型不要和坚硬的金属制品磕碰或在搬动的过程中不能用力过猛以免划花；避免与盐酸、食盐、盐卤之类的物质接触以免发生化学反应，可用棉质柔软的布擦拭可保持光亮和美观。

The metal hand model shall not collide with hard metal products or use too much force during moving to avoid scratching; Avoid contact with hydrochloric acid, salt, brine and other substances to avoid chemical reaction. Wipe with soft cotton cloth to keep bright and beautiful.

塑胶材质的手板模型受温度影响较大，尽量不要把它放在阳光直射的地方，因为紫外线会加快塑料老化；避免刮蹭，远离油品，不要放在潮湿、空气不流通的地方；要避免暴热和暴冷环境，防止其热胀冷缩减短使用周期。

The plastic hand model is greatly affected by temperature. Try not to put it in the direct sunlight, because ultraviolet light will accelerate the aging of plastic; Avoid scratching, keep away from oil products, and do not put them in damp places with poor air circulation; The hot and cold environment shall be avoided to prevent its thermal expansion and cold contraction from shortening the service cycle.

在正确使用手板模型时，还需对手板模型进行定期维护保养，手板模型的导柱、导套及其他有相对运动的部位应经常加注润滑油，对于锻模、塑料模、压铸模之类手板模型在每模成形前都应将润滑剂或起模剂喷涂于成形零件表面。

When using the hand model correctly, it is also necessary to carry out regular maintenance for the hand model. The guide post, guide sleeve and other parts with relative movement of the hand model should always be filled with lubricating oil. For the hand model such as forging die, plastic die and die-casting die, the lubricant or mold lifting agent should be sprayed on the surface of the formed parts before each mold is formed.

对手板模型进行有计划的防护性维护，并通过维护过程中的数据处理，则可预防手板模型在生产中可能出现的问题，还可提高维修工作效率。

Planned protective maintenance of the prototype model and data processing during maintenance can prevent problems that may occur in the production of the prototype model and improve the maintenance efficiency.

要想提高手板模型的质量，须每个环节都要考虑到对手板模型质量的影响，其次还须通过各部门的通力合作。手板模型的质量是手板模型企业自身实力的真实体现。

In order to improve the quality of the prototype model, each link must take into account the impact on the quality of the prototype model, followed by the cooperation of all departments. The quality of prototype model is the real embodiment of the strength of prototype enterprises.

以上是厂家为大家讲解有关手板模型保养注意事项了，只要保养得当，其使用周期将会大大廷长，能为企业减少成本预算，希望能够给您帮助，更多相关事项就来我们网站http://m.axcwv.cn进行咨询了解吧！

The above is the manufacturer's explanation of the precautions for the maintenance of the prototype model. If the maintenance is proper, the service life will be much longer, which can reduce the cost budget for the enterprise. I hope to help you. More relevant matters will come to our website http://m.axcwv.cn Consult and understand!