公司新闻
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
快速成型手板内孔加工的方法！
来源：http://m.axcwv.cn作者：山东嘉瑞杰机械科技有限公司发布时间：2020-01-07
内孔加工方法有钻孔、铰孔、铰孔、镜孔、磨孔、拉孔、磨孔、磨孔、磨孔、磨孔、滚孔等。下面济南手板介绍两种常用的钻孔和扩眼方法。
The inner hole processing methods include drilling, reaming, reaming, mirror hole, grinding hole, pulling hole, grinding hole, grinding hole, grinding hole, grinding hole, rolling hole, etc. The following Jinan hand board introduces two commonly used drilling and reaming methods.
钻孔时，由于麻花钻的长度长，钻芯直径小，刚性差，又有横向边缘的影响，所以钻孔具有以下工艺特点。
During drilling, due to the long length of twist drill, small core diameter, poor rigidity and the influence of lateral edge, the drilling has the following technological characteristics.
1. 钻头容易变形;
1. The bit is easy to deform;
2. 光圈容易放大;
2. Aperture is easy to enlarge;
3.孔隙表面质量差;
3. Poor quality of pore surface;
4. 钻井时轴向力大;
4. Large axial force during drilling;
与麻花钻相比，扩孔钻的结构具有以下特点。
Compared with twist drill, the structure of reamer has the following characteristics.
1. 良好的刚性;由于扩孔后的刀量小，切屑少，扩孔后的切屑槽浅而窄，钻芯直径较大，增加了扩孔工作部分的刚性。
1. Good rigidity; due to the small amount of cutter and less chips after reaming, the chip groove after reaming is shallow and narrow, and the core diameter is large, which increases the rigidity of the working part of reaming.
2. 好方向;扩孔钻头有3-4个刀具齿，刀具周围的刃数增加，导向效果相对增强。
2. Good direction: the reaming bit has 3-4 cutter teeth, the number of blades around the cutter increases, and the guiding effect is relatively enhanced.
3.好芯片的条件;铰孔钻头无横向刃参与切削，切削速度快，可采用较大的进给，生产率较高，同时切屑少，切削平稳，不易划伤加工表面。
3. Good chip conditions; reaming bit has no transverse edge to participate in cutting, with high cutting speed, large feed can be adopted, high productivity, less chips, stable cutting, and not easy to scratch the machining surface.
因此，与钻孔相比，铰孔具有更高的加工精度和更低的表面粗糙度值，可以在一定程度上修正钻孔的轴向误差。
Therefore, compared with drilling, reaming has higher machining accuracy and lower surface roughness value, which can correct the axial error of drilling to a certain extent.
更多相关信息可以点击官网进行咨询：http://m.axcwv.cn
More information can be found on the official website: http://m.axcwv.cn
上一篇：手板模型与模具的区别在哪里？
下一篇：手板模型打样加工是怎么计算的？
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
