公司新闻
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
手板模型处理过程中不要出现哪些现象？
来源：http://m.axcwv.cn作者：山东嘉瑞杰机械科技有限公司发布时间：2020-05-14
一、手板模型手板手工
1、 Handmade model Handmade
1、生产工艺和图纸不要对错；
1. Do not make mistakes in production process and drawings;
2、(ABS材料)产品在粘接时，注意胶水的用量多或少，不要有开裂现象；
2. (ABS material) when bonding products, pay attention to the amount of glue used is too much or too little, and do not crack;
3、(亚克力材料)产品在粘接时，不要有开裂、气泡的现象；
3. (acrylic material) when the product is bonded, there shall be no cracks or bubbles;
4、(PC材料)产品放在烤箱或用风筒吹时，温度不要过高；
4. (PC material) when the product is placed in the oven or blown by the air tube, the temperature shall not be too high;
5、(POM、尼龙、铝合金材料)产品不能粘接，原因是这三种材料胶水粘不稳，所以是不能用CNC拆件加工的，手工打孔时不能把孔位打偏，否则产品就会报废；
5. (POM, nylon, aluminum alloy materials) products can't be bonded, because the glue of these three materials is not stable, so it can't be processed by CNC disassembly, and the hole position can't be deviated during manual drilling, otherwise the products will be scrapped;
6、组装时不要粘接错地方，不要有错位和间隙；
6. During assembly, do not stick to the wrong place, do not have dislocation and clearance;
二、手板模型手板打磨
2、 Hand board model hand board grinding
7、产品工件有R角的打磨不要打成了直角，还有工件边缘有弧度的地方，打磨时也许需要注意。
7. When grinding the product workpiece with R angle, do not make it into a right angle. There are also places with radian on the edge of the workpiece. You may need to pay attention to them when grinding.
8、打磨不要把尺寸打小。
8. Do not reduce the size of grinding.
三、手板模型手板复模
3、 Hand board model
9、复模注意不要变形和缩水，不要有太多的气泡，如果气泡多会加大手工那边的工作量
9. Do not deform or shrink the mold. Do not have too many bubbles. If there are too many bubbles, it will increase the workload on the manual side
四、手板模型手板喷油。
4、 Handboard model handboard spray.
10、喷油方面不要有色差、油漆爆裂、掉漆等现象，还有在调油和喷油时控制尘点。
10. Do not have the phenomenon of color difference, paint burst, paint falling, etc. in the aspect of oil injection, and control the dust point in the process of oil adjustment and oil injection.
上一篇：真空复模的过程以及注意事项介绍！
下一篇：CNC手板模型加工工艺流程
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
